Fire Depot Blog Firechief Stove Guard smart fire prevention system installed in Rochdale apartments

The Riverside development in Rochdale includes two nine storey apartment blocks comprising a mix of 240 one- and two-bedroom properties for private rent. The Rochdale town centre Riverside regeneration project also includes a 147-bedroom hotel and 43,000 square feet of office space.The Fire regulations which apply to high-rise living accommodation meant that the kitchens in the apartments would require a fire suppression unit complete with sprinklers to be fitted. These units need to be installed and maintained by a specialist engineer and can also cause damage within a property should they be activated due to a fire. Therefore, the Firechief Kitchen Stove Guard was chosen as an alternative, unobtrusive design-led fire prevention solution.THE FIRECHIEF KITCHEN STOVE GUARD SOLUTION50% of all accidental house fires start in the kitchen. However, the Firechief Kitchen Stove Guard provides a worry-free approach to managing cooker top safety without affecting normal cooking since it reacts to an alarm by turning the cooker's electricity supply off. The intelligent heat sensor in the Kitchen Stove Guard tracks the rate of increasing temperature, as a steeply rising temperature is an indication of a developing fire hazard.HOW IT WORKSThe Firechief Kitchen Stove Guard is a device that works out when the temperature of cooking is too high (and therefore potentially hazardous) and turns off the source of ignition, effectively preventing kitchen fires before they start. This creates a safer home for the tenants and owners of flats and luxury apartments.The Firechief Kitchen Stove Guard is a smart way to guard against kitchen fires because it responds before the formation of toxic gases and before a fire is ignited. It will even cut off the electricity supply if the hob has been left on accidentally - the setting for this can be tailored to individual installations. The Cooker is reactivated simply by pressing the sensor button. The device works with induction hobs.THE BENEFITSThe fitting of the Firechief Kitchen Stove Guard solution brought a number of benefits to the apartments:Sleek sensor designIntelligent fire safety technology which prevents fires long before they can start. The heat sensor activates the cooker switch when pre-fire conditions are detected instead of reacting to extinguish a fire once it has actually begunEasier and simpler installation, undertaken by the electrical contractors already working on site rather than a specialist fire suppression installation engineerContinuous 24/7 protection for peace of mind. The device monitors and adapts to the occupiers cooking styleAutomatic fault diagnosis constantly analyses the Kitchen Stove Guard's function when the hob is in use - no monthly testingLower cost - less than half the cost of a fire suppression system No annual maintenance requiredNo annual maintenance requiredFulfils the requirements of Stove Guard Standard EN 506152-year warrantyTo learn more about the Firechief Kitchen Stove Guard, visit the the Firechief Kitchen Stove Guard product websiteFire Depot has been the UK's favourite fire safety supplier for over 50 years, we know the fire protection and prevention business inside out. Our experienced team can offer advice and guidance about any of our fire safety products. For expert help and advice, please contact the Fire Depot team on 0330 999 2233, email us at sales@firedepot.co.ukor visit https://www.firedepot.co.uk/ to see our full range of fire safety products.The information contained within this blog is provided solely for general informational and educational purposes and is not intended as a substitute for professional advice. Before taking any actions based upon this information, we advise the reader to consult any and all relevant statutory or regulatory guidance and where felt necessary to consult a qualified fire or industry regulation professional. The use or reliance on any information contained herein is solely at the reader's risk.