Use this detailed step-by-step repair guide to help you replace the EB-BT800FBC battery in your Samsung Galaxy Tab S 10.5 Tablet.Necessary Replacement Parts:New EB-BT800FBC Replacement Battery for Samsung Galaxy Tab S 10.5Necessary Replacement Tools:Plastic Opening ToolsPhillips #00 Precision Screwdriver for Electronics Note: Above tools are included for FREE when this replacement battery is purchased from mpfproducts.comStep 1 Insert one of the plastic opening tools gently into the outer frame surrounding the SD card slot and carefully pry in an upward motion to create separation in the front and rear panels.Step 2Continue carefully sliding and prying around the tablet with a plastic opening tool to separate the front panel from the back panel. There are clips around the device you will release and you will hear a dislocating sound as they are disconnected.Step 3 Once the two halves are freed, remove the back cover and place in a safe area.Step 4Next, use a plastic opening tool or tweezers to peel back the green tape from the cable connectors on the two black ribbon cables. Use a plastic opening tool to lift up on the plastic clips on the connectors.Step 5Remove the six Phillips screws surrounding the battery and place in a safe area.Step 6 Use a plastic opening tool and gently insert it between the battery and the frame. Carefully move the tool in a downward motion away from the battery to remove the battery from device.Step 7 Hold the battery and disconnect the battery connector to safely remove the battery from the tablet. Once the old battery is removed, replace with your new:New EB-BT800FBC Replacement Battery for Samsung Galaxy Tab S 10.5(pictured below) and follow steps in reverse order to reassemble.
