General CleaningClean stone surfaces with a cleaner designated safe for natural stone. Use a clean mop on floors and a soft cloth for other surfaces for best results. Don't use more than the recommended amount of any cleaning product. Too much may leave a film, causing streaks. Change rinse water frequently. Do not use products that contain lemon, vinegar or other acids on marble, travertine or limestone as these can etch the surface of the stone. Do not use scouring powders or creams; these products contain abrasives that may scratch the surface.Floor SurfacesDust mop interior floors frequently using a clean non-treated dry dust mop. Sand, dirt and grit do the most damage to natural stone surfaces due to their abrasiveness. Mats or area rugs inside and outside an entrance will help to minimize the sand, dirt and grit that can scratch a stone floor. Be sure that the underside of the mat or rug is a non-slip surface. Do not use vacuum cleaners that are worn, the metal or plastic attachments may scratch the surface.Bath and Other Wet AreasIn the bath / shower or other wet areas, soap scum can be minimized by using a squeegee after each use. Consult the Care Guide for detailed instructions and recommended products on how to remove soap scum as well as resolving other issues that can arise in a bath area.Counter/Vanity Top SurfacesClean your countertops daily with a soft cloth or paper towel and a residue-free cleaner designated safe for natural stone.If Streaking Occurs, buff the countertop with a clean white terry cloth or paper towel if streaking occurs.Use a Good Stone Polish OccasionallyFor additional luster on those special occasions, apply a good stone polish to the surface of your countertops.Seal if NecessaryCountertops may need to have a penetrating sealer applied. If a sealer is applied, be sure that it is non-toxic and safe for use in food preparation surfaces.Outdoor Pool & Patio AreasIn outdoor pool, patio or hot tub areas, flush with clear water and use a mild bleach solution to remove algae or moss.
